The REGSysTM Triple-Wound Feature

The triple-wound feature is available for voltage regulators REG-D and REG-DA. Originally, the feature was developed to regulate and monitor triple-wound transformers.

Since then, it has become possible to use the feature for other application such as so-called “energetic recovery” or to implement applications requiring a second voltage (U1, U2) and current (I1, I2) measurement. In these cases, the triple-wound feature in the firmware is usually combined with a background program (special A. Eberle tool) to implement customer-specific requirements.

The most important characteristics & other applications

The triple-wound functionality can also be used for other applications. Read more about these applications and the most important characteristics of the triple-wound feature in our application report.

Do you need further information?

Feel free to contact us!


Contact

You might also be interested in

Economic Analysis Low Voltage Regulation

Smart Grids and the resulting changes in the distribution grids face many distribution grid operators with different challenges. These include...

Mehr erfahren

Parallel Charging of E-Vehicles

he Technische Hochschule Bingen (THB) charged e-vehicles in parallel at ten charging points. What was of interest here was measuring the charging current and its effect on the THB network; to determine pulse frequencies and their distribution across the network and to assess network asymmetries...

Mehr erfahren

Evaluating Supraharmonics up to 150 kHz in E-Vehicles at TH Bingen

In the first part of the measurement campaign in 2016, various e-vehicles were assessed as to their charging behaviour and feedback to the network. The evaluation considered DC harmonics up to the 50th...

Mehr erfahren

Pilot Project on a Motorway Parking Lot

In 2018, the “Auergründel” PWC (car park with WC) on the A6 suffered repeat failures of its fresh and waste water pumps...

Mehr erfahren
a-eberle kontakt newsletter ×