The Mobile Tool for the Power Quality Expert
Rapidly locate the causes of network faults
The PQ-Box 200 mobile power quality network analyzer, power meter and transient recorder has been fitted with a wide range of triggering capabilities in order to rapidly locate the causes of network faults. The Class A device has been developed for measurements on low, medium and high-voltage networks and is ideally designed for measurements in harsh environments or where space is very limited. In addition, the device allows the power quality of public and industrial networks to be assessed. This means the device offers everything power quality experts need.
More questions or start an enquiry? Just click on “Product enquiry”.
Product overview A. Eberle
Technical Data Sheets
Adapter Cable Set
External Power Supply
Navilog GPS Clock
Record rapid switching transients at a rate of 4 mHz
The PQ-Box 200 has a sampling rate of 4 MHz for recording rapid switching transients. The measurement range for transients is +/- 5,000V. Voltage and current harmonics are recorded up to 20 kHz. The device is highly accurate and has a 24-bit input converter.
WLAN interface for cableless communication with the software & app
In addition to a USB and ethernet interface, the data recorded by the PQ-Box 200 can be transferred to the evaluation PC via a fast WLAN interface. The product comes with the extensive WinPQ mobile evaluation software, which can be installed on as many PCs as you wish. To round off the excellent user experience, we have developed the PQ-Box app for both Android and iOS. The app allows you to display a wide range of online measurements and alter configurations for current and voltage transformers, measurement intervals or nominal voltages of the PQ-Box 200.
All the standards and protocols upheld – making our products fit for the future
The PQ-Box 200 creates an automatic standard assessment and event record to:
- EN 50160
- IEC 61000-2-2
- IEC 61000-2-12
- IEC 61000-2-4 (Klasse 1; 2; 3)
- NRS 048
- IEEE 519
- VDE N-4105
- IEC 61000-4-30 Ed. 3 Klasse A
- IEC 61000-4-7
- IEC 61000-4-15
Ripple control signal analysis
In addition to measuring the ripple control level, the device is able to trigger a ripple control frequency and capture the voltages and currents for a set frequency. The complete telegram can be shown to a length of 210 seconds, while a wide range of parameters can be set in the measurement device (triggering threshold, recording threshold, ripple control frequency, bandwidth of the filter curve for ripple control frequency).