DC frequency analysis to 170 kHz

PQ-Box 300

This mobile power quality network analyser, power meter and transient recorder allows permanent DC frequency analysis to 170 kHz. The Class A device has been developed for measurements on low, medium and high-voltage networks and is ideally designed for measurements in harsh environments or where space is very limited. In addition, the device allows the power quality of public and industrial networks to be assessed. The device is thus an essential aid for analysis in high-frequency ranges.

Accessories

Catalogue
Rogowski Coil
Adapter Cable Set
Calib-Box
CAT-Booster
External Power Supply
Bags
Current Clamp
Navilog GPS Clock
NIS-Clock
Istolation Cover
Sensors

Permanent recording of frequencies up to 170 kHz

Computation from 8 kHz to 170 kHz takes place using a continuous FFT at 200 msec intervals. More than 5000 different measured values can be recorded permanently with measuring intervals from 200ms. In addition, ½ periods (10 ms) minimum and maximum values are recorded.

WLAN interface for cableless communication with the software & app

In addition to a USB and ethernet interface, the data recorded by the PQ-Box 300 can be transferred to the evaluation PC via a fast WLAN interface. The product comes with the extensive WinPQ mobile evaluation software, which can be installed on as many PCs as you wish. To round off the excellent user experience, we have developed the PQ-Box app for both Android and iOS. The app allows you to display a wide range of online measurements and alter configurations for current and voltage transformers, measurement intervals or nominal voltages of the PQ-Box 300.

All the standards and protocols upheld – making our products fit for the future

The PQ-Box 300 creates an automatic standard assessment and event record to:

  • EN 50160
  • IEC 61000-2-2
  • IEC 61000-2-12
  • IEC 61000-2-4 (Class 1; 2; 3)
  • NRS 048
  • IEEE 519
  • VDE N-4105
  • IEC 61000-4-30 Ed. 3 Class A
  • IEC 61000-4-7
  • IEC 61000-4-15
  • IEC 62586-2 Ed. 2
  • IEC 62586-1

Ripple control signal analysis

In addition to measuring the ripple control level, the device is able to trigger a ripple control frequency and capture the voltages and currents for a set frequency. The complete telegram can be shown to a length of 210 seconds, while a wide range of parameters can be set in the measurement device (triggering threshold, recording threshold, ripple control frequency, bandwidth of the filter curve for ripple control frequency).

WinPQ mobil
Logiciel d’analyse de haute qualité

Le WinPQ mobil a été conçu pour aider l’utilisateur à
évaluer les données. La présentation claire des valeurs mesurées était au premier plan. Ainsi, le logiciel fait progresser non seulement la PQ-Box, mais aussi l’utilisateur.

a-eberle kontakt newsletter ×