The Mobile Power Quality Meter for Experts
PQ-Box 200
Rapidly locate the causes of network faults
PQ-Box 200
The mobile power quality meter PQ-Box 200 has been fitted with a wide range of triggering capabilities in order to rapidly locate the causes of network faults. The Class A device has been developed for measurements on low, medium and high-voltage networks and is ideally designed for measurements in harsh environments or where space is very limited. In addition, the device allows the power quality of public and industrial networks to be assessed. This means the device offers everything power quality experts need.
Further questions or want to start an enquiry? Please click “Product Enquiry”.
Cross-Product Downloads
Cross-Product Downloads
Special Publications
Flyer
Feature Matrix
Product Overview A. Eberle
A. Eberle Seminars in Nuremberg
PQ-Box 200
PQ-Box 200
Instruction Manual
Technical Data Sheets
Certificates
Tender Specifications
Accessories
Accessories
Current Clamp
Rogowski Current Clamps
Adapter Cable Set
Calib-Box
External Power Supply
Bags
Navilog GPS Clock
NIS-Clock
Isolation Cover
Record rapid switching transients at a rate of 4 mHz
The mobile power quality meter PQ-Box 200 has a sampling rate of 4 MHz for recording rapid switching transients. The measurement range for transients is +/- 5,000V. Voltage and current harmonics are recorded up to 20 kHz. The device is highly accurate and has a 24-bit input converter.
WLAN interface for cableless communication with the software & app
In addition to a USB and ethernet interface, the data recorded by the PQ-Box 200 can be transferred to the evaluation PC via a fast WLAN interface. The product comes with the extensive WinPQ mobile evaluation software, which can be installed on as many PCs as you wish. To round off the excellent user experience, we have developed the PQ-Box app for both Android and iOS. The app allows you to display a wide range of online measurements and alter configurations for current and voltage transformers, measurement intervals or nominal voltages of the PQ-Box 200.
All the standards and protocols upheld – making our products fit for the future
The mobile power quality meter PQ-Box 200 creates an automatic standard assessment and event record to:
- EN 50160
- IEC 61000-2-2
- IEC 61000-2-12
- IEC 61000-2-4 (Class 1; 2; 3)
- NRS 048
- IEEE 519
- VDE N-4105
- IEC 61000-4-30 Ed. 3 Class A
- IEC 61000-4-7
- IEC 61000-4-15
Simple menu navigation and intuitive operation of the measuring device
When designing the menu navigation of our mobile network analyzers, we focused on enabling particularly user-friendly and intuitive navigation and thus operation of the measuring device. This means that you as a user can quickly find your way around the device when using the PQ-Box and concentrate on the essentials: the measurement. The user interface of the PQ-Box 150 is identical to that of the PQ-Box 200 and PQ-Box 300 models – also from the PQ-Box family from “A. Eberle”.
Standard accessories & device installation – how your PQ Box arrives
- PQ mains analyser »PQ-Box 200«
- USB cable
- 4mm safety sockets incl. inserts for worldwide sockets
- 5 Delphin terminals (3x red, 1 x green, 1 x blue)
- Case for measuring device and accessories
- Hardware operating instructions (software instructions via website and included in software)
- QR code for downloading WinPQ mobile software
- TCP-IP connection cable
- Wide-range AC/DC power supply unit for supply via test leads
- Two black stacking plugs (stacking of measuring cable and power supply on one terminal)
- Carrying and fastening strap
- Free connection set for AUX input (4mm safety plug)
Ripple control signal analysis
In addition to measuring the ripple control level, the mobile power quality meter is able to trigger a ripple control frequency and capture the voltages and currents for a set frequency. The complete telegram can be shown to a length of 210 seconds, while a wide range of parameters can be set in the measurement device (triggering threshold, recording threshold, ripple control frequency, bandwidth of the filter curve for ripple control frequency).
More Power Quality Devices
Discover our product range
News from the Productgroup
PQMobil – News
General Knowledge
Measuring the voltage drop
23. January 2025
The voltage drop is the difference between the voltage at the beginning and end of an electrical line. In an electrical network, the voltage can be reduced by the resistance and impedance of the lines,[…]
Read more
Blogpost
PQ-Box User Training in Başiskele (Turkey) With Our Partner GENETEK Enerji Sistemleri Ltd.
11. December 2024
In August, we held a training course with our partner GENETEK Enerji Sistemleri Ltd for our portable PQ network analyzers in Turkey.[…]
Read more
General Knowledge
Harmonics
17. September 2024
Harmonics are waves whose frequencies are an integer multiple higher or lower than those of the fundamental oscillations. They arise due to non-linear loads in the grid when the electrical voltage is distorted[…]
Read more
Blogpost
International Partner Week 2024 – a Look Back
29. August 2024
Our International Partner Week 2024 – many old friends and new faces were our guests, it was a pleasure.[…]
Read more
General Knowledge
Voltage Monitoring
1. July 2024
Find out everything you need to know about voltage monitoring in this article. What is voltage monitoring, why is voltage monitoring essential for both energy supply companies and industrial companies[…]
Read more
General Knowledge
What Is Load Profile Measurement/Power Measurement?
25. June 2024
This article explains the definition and difference between load profile measurement (RLM), power measurement and measuring the standard load profile. These are important methods for accurately recording[…]
Read more
Special Publication
Ferrari´s Meter vs. Electronic Meter
9. April 2024
This technical report analyzes a power measurement at a large industrial customer. The customer records very high currents and fifth harmonic voltages during production time, which leads to poor voltage[…]
Read more
General Knowledge
Residual Current
6. March 2024
In this article, you will learn about residual current measurement & residual current monitoring and why it is important to measure residual current.[…]
Read more
General Knowledge
Power Quality
6. March 2024
Good power quality is characterized by the fact that the mains voltage actually arriving at the consumer matches the mains voltage promised by the utility company.[…]
Read more
General Knowledge
Reactive Power – Definition, Calculation and Measurement
6. March 2024
The key role of reactive power in electrical engineering: definition, calculation, measurement and the differences to active power and apparent power. Find out how reactive power influences the efficiency[…]
Read more
General Knowledge
What Is Apparent Power and How Is It Calculated?
6. March 2024
This article addresses the question of what apparent power is and how to calculate it. An understanding of apparent power is crucial for the correct dimensioning of inverters and therefore for the optimum[…]
Read more
Special Publication
Angle Determination of Voltage and Current Harmonics in Practice
24. August 2023
Today’s devices and equipment such as switched-mode power supplies, frequency converters, regulated drives, charging devices for e-mobiles or LED lighting work internally with high clock frequencies in[…]
Read more
General Knowledge
All „Supra“ With Your Grid?
23. May 2023
Today’s devices and equipment such as switched-mode power supplies, frequency converters, controlled drives, charging devices for e-mobiles or LED lighting work internally with high clock frequencies in[…]
Read more
General Knowledge
Power Quality Analysis: Tips and Tricks II
28. April 2023
Useful tips & tricks for handling Power Quality measuring devices and typical user errors – now in our two-part article! This article provides further insights and practical tips and application examples[…]
Read more
General Knowledge
Power Quality Analysis: Tips and Tricks I
27. April 2023
Useful tips & tricks for handling Power Quality measuring devices and typical user errors – now in our two-part article! This article explains tips and tricks for performing power quality measurements.[…]
Read more
General Knowledge
Four Ways to Measure Current
26. April 2023
The following technical report examines various methods for measuring current. It discusses how currents are measured using power analyzers and current clamps. The respective advantages and disadvantages[…]
Read more
General Knowledge
Cos ϕ vs. Power Factor λ – Practice
25. April 2023
This second technical report on the subject of reactive power and in particular the distortion reactive power supplements the first contribution “Cos ϕ vs. power factor λ – Theory”. In this article,[…]
Read more
General Knowledge
Cos ϕ vs. Power Factor λ – Theory
24. April 2023
This technical report discusses the distinction between power factor and cosine phi. Cosine Phi, formerly widely known as the ratio of active power to apparent power, however, has a different meaning for[…]
Read more
Special Publication
Mains Feedback Interferes With Protective Devices
10. October 2022
In a photography and design studio, located in a large industrial park, a RCD tripped frequently. Due to the permanent power cuts, the employees of the studio could not work properly. This article shows[…]
Read more
Special Publication
Creating Power Quality Surveys With PQ-Box and WinPQ Mobil Software
18. May 2022
The following report displays the PQ-Box and WinPQ mobil software interact to allow an evaluation of the disturbance levels at a measuring point according to approved grid norms.[…]
Read more
